- enter the lock password
- lock this page after save
タイトル:
最終更新情報: 2:03:03 am on 2 March 2013 by pl927.nas81t.p-tokyo.nttpc.ne.jp
You can use NanoBoardAG as an Arduino by the following steps. 1. Download and install newest stable version of Arduino IDE (1.0.3). *http://arduino.cc/en/Main/Software* 2. Add the following lines to \hardware\arduino\boards.txt ############################################################## atmega8o8.name=[Optiboot] ATmega8 8MHz atmega8o8.upload.protocol=arduino atmega8o8.upload.maximum_size=7680 atmega8o8.upload.speed=115200 atmega8o8.bootloader.low_fuses=0x94 atmega8o8.bootloader.high_fuses=0xDC atmega8o8.bootloader.path=optiboot atmega8o8.bootloader.file=optiboot_atmega8-8m.hex atmega8o8.bootloader.unlock_bits=0x3F atmega8o8.bootloader.lock_bits=0x0F atmega8o8.build.mcu=atmega8 atmega8o8.build.f_cpu=8000000L atmega8o8.build.core=arduino atmega8o8.build.variant=standard ############################################################## 3. Start Arduino IDE then choose "[Optiboot] ATmega8 8MHz" from "Tools" > "Board" menu. 4. Choose the specific COM port from "Serial Port" menu if needed. 5. Try any sketches! I recommend to test "Blink" from "Examples" > "01.Basic" at first. 6. You can revert default NanoBoardAG by uploading "NanoBoardAGWithMotor.pde".
次回保存時にアラートメールを送信するメールアドレス一覧:
